Blexfraptor

➥Be sure to check this topic again and READ it:yes ➥Age:15 ➥Experience in Adobe Photoshop(Months or years):2 years and 2 months ➥Attach your Gallery link (If you have one): https://csblackdevil.com/forums/topic/268531-blexfraptors-gallery/page/3/ ➥Any other editing program you use?:only photoshop ➥What version of Photoshop do you mostly use?:photoshop CS6 ➥In what section you have your most contribution?:design Section ➥Have you read all the sections' rules?:yes ➥Have you read the community rules?:yes ➥Do you agree that you cannot be part of another project when you apply and after if you get accepted?:yes ➥What can you say about you that will make us interested about your Photoshop skills & experience?(Minimum 10 words):I only work with dark blur, clear, of course, different effects and texts

SSDs by their nature are degrading and partly losing performance if they have not had optimal maintenance or favorable conditions for proper use. Therefore, the passage of time can cause many units to begin to be "slow" if we compare them with the moment of their arrival at our hands. How to recover its original performance and with it its speed? We just have to follow the next steps. In the first place and if we do not have or remember the parameters of our SSD, it is convenient for us to go to the manufacturer's website to look at its specifications and in the way to a review where it shows us the real performance of the unit, in order to compare data. We start from the basis and premise that we know this data, so the first step will be to check the current performance of our disk by measuring the speed of the SSD. ATTO Disk Benchmark enters the scene Ideally, download a benchmark as complete as ATTO, which will tell us the read and write performance of our SSD in a range of files and sizes more than interesting. The benchmark does not require anything more than pressing start and starting to measure said performance, so finally and once finished, the data it will show us will be something similar to this: The speeds will logically vary between the different models, but in our case there is a drop in performance at some point in the writing, while the reading remains firm. This is because we have the SSD almost full, which lowers the performance in this section. Similarly, it is a very normal behavior in SSDs that need to be deleted and restored to their initial point. Save the data that is in the SSD The process that we are going to carry out implies a total erasure of the disk, so the ideal is that we keep everything necessary on another hard disk before starting. After deletion, many files may not be accessible from any recovery software, so be sure what is saved and what is not. Deleting and restoring the SSD Although each brand offers a different software to do this process, we are going to do it from a more personal and equally effective section, since for example, if we want to recover the performance of the main unit of the operating system, no software option existing will allow you to do it while we remain in Windows. Therefore, we must enter the UEFI of our motherboard and go to the secure erase utility for SSDs. This option will vary depending on the motherboard model and perhaps the UEFI model we have, but normally today they all include it as standard. Recover the speed of your SSD In our case we will use an ASUS X570-F Gaming. Once inside the UEFI, we will go to the Tool section, where the ASUS Secure Erase utility is located, where we will proceed to enter. Once inside we will be shown the SSD that we have available and that the board detects as compatible. Now we just have to select the one we want to restore, accept the warning and in just a few minutes (in the worst case) we will have our SSD ready, operational and full speed, like when it arrived from the factory, with all its performance.

Neither Windows nor macOS, free software. Thus we call "any computer program whose source code can be studied, modified, and used freely for any purpose and redistributed without or with changes and / or improvements." Its defenders place the freedom of the computer user as a fundamental purpose. For years it has seemed the romantic and hippy dream of a few computer scientists, but free software is no joke. The latest proof that it has no future but a present comes from South Korea, a country at the forefront of technology in many aspects. There, the Government has announced that it changes from Windows to Linux. The Korea Herald tells that South Korea announces the change in the operating system of its Windows computers to Linux, due to the costs of maintaining Windows. And it does so now that Microsoft's official Windows 7 support is about to end, in January 2020. The decision has been communicated by the Ministry of Interior and Security of the country, which has been responsible in recent months to test the operating system and verify that there is no security problem. It is now necessary to verify that Linux works on private network devices without risk and that it is compatible with the created web pages. The Korean government estimates that $ 655 million will be spent on the move to Linux and the purchase of new computers. But there is more to be saved by leaving the Microsoft operating system behind. The official Windows 7 support ends in January 2020 and Korea had to buy new licenses. The Korean state wants not only to save money but, according to its Ministry of Interior, to avoid reliance on a single operating system. If the move to Linux ends up being a fact, South Korea will become the largest government in the world that goes over to this free software.

The 2020 model is practically the same model that we have known for several years. Outside, the Jeep Grand Cherokee SRT departs from the rest of the range thanks to its SRT sports chest, grille with black gloss insert and black mesh, double exhaust outlet, mirrors and fascias to the body color, BI headlights - HID Xenon, LED daytime running lights, smoked finish LED skulls, 20 ”forged aluminum wheels with Performance P295 / 45ZR20 BSW All Season rims, etc. Inside doors, it features distinctive elements such as the flattened steering wheel with shifters, Nappa leather and suede seats, interior details with carbon fiber, steering wheel and electronic gear lever lined with perforated leather and sports pedals. In terms of equipment we find air conditioning with automatic two-zone temperature control and air filter, 8-way electric front seats, heated front and rear seats, electrochromic rearview mirror with microphone, LED interior lighting, remote ignition system, dashboard central instruments and armrests lined with leather, 115V outlet, 12V auxiliary outlets and electric height and depth adjustment. The list of complete with lamp washers, windshield wipers with rain sensor, panoramic dual sunroof, automatic lamp leveling system, automatic light intensity adjustment system, automatic lamp ignition system, rear hatch with electric opening, tinted front and rear privacy glass. As for the infotainment system, it has the UConnect system with 8.4 ”touch screen and 825W Harmon / Kardon high performance audio system, 19 speakers and 3 subwoofers. It also comes standard with Apple CarPlay and Android Auto. Regarding safety, the Jeep Grand Cherokee SRT 2020 has front airbags, front side, side curtain and knees for the driver. This without forgetting the ParkView Camera and ParkSense rear sensors, Traction Control (TCS), Stability Control (ESC), Trailer Stability Control (TSD), 4-wheel disc brakes, with anti-lock (ABS) system, Windshield with rain sensor, Blind spot sensor (BSM) and reverse transverse route, Ready-Alert brake enlistment system (RAB), Rain brake assist system (RBS), Tire pressure monitoring system ( TPM), Lane departure warning plus LaneSense Lane Departure, Park Assist parking assistance, Advanced emergency braking assistance, Adaptive braking speed control (ACC), Front collision warning system (FCW), among others. The Jeep Grand Cherokee SRT 2020 features a HEMI V8 6.4L engine with 475 horsepower and 465 lb-ft of torque coupled to an 8-speed TorqueFlite automatic transmission. According to the brand, with this dumbbell announces a consumption of 8.2 km / l in the combined cycle. Manufactured at the Jefferson North assembly plant in Detroit in the United States.

With a case in Silicon Valley, another in a small town in California, another in Oregon and another in Seattle, the worst scenario of infection of the coronavirus in the United States began to take shape in the last three days. These are cases of "unknown origin", that is, it is for the moment impossible to trace how these patients have been infected. For the United States, since this week the Wuhan coronavirus is no longer a virus imported from China, it is no longer worth keeping an eye on airports and canceling flights. The virus is spreading locally along the West Coast of the country. The feeling that control of the situation is being lost was reinforced on Saturday morning when the first deceased by the coronavirus in the country was confirmed. It was a woman, with delicate health and over 50 years, who died in the Seattle area. The Washington State health authorities planned to give the details of the case at a local press conference at noon. Cases of unknown origin are still "suspected", while local, state and federal health authorities try to investigate the lives of these people to find the source of the infection and to stop the transmission. There are 1,500 kilometers between the Silicon Valley patient and the Seattle patient. The diagnoses were issued after testing with equipment provided by the federal disease control authority, CDC, although definitive confirmation is lacking. The first death by coronavirus in the United States caused the appearance of the president in the White House along with those responsible for the response to the crisis. Trump announced new travel restrictions affecting Iran, South Korea and Italy. The current veto for travelers from Iran will be extended to any foreign citizen who has passed through that country in the last 14 days. The Government has also raised the alert level, thereby reinforcing controls and calling on Americans to avoid the areas of Italy and South Korea most affected by this crisis. The US president addressed the press on Saturday from the White House in a tone much more serious than that of the first appearance following this outbreak, when he raised many criticisms of the opposition for removing iron from the risks, although he insisted that "There is no reason to panic." "It is being managed in a very professional way," he said, after stressing that the United States was suffering much less cases than other countries with much less po[CENSORED]tion and foreign entry. This containment is due, as defended by Vice President Mike Pence, to early restrictions on travelers from China. Trump admitted that "new cases are likely to arise," but reiterated that those in good health will have no problem overcoming the disease. He also announced that this Monday he will receive in the White House managers of pharmaceutical companies to address the response to this crisis. "The country is prepared to respond to any circumstances, we expect them to be minor circumstances, but we are prepared for anything," he insisted. "What we know is that the virus is here, present at some level, but we don't know how much," said Dr. Sara Cody, head of public health services for Santa Clara County (Silicon Valley). The case detected on Friday is the third in that county and the tenth in California. But so far they were all from people who had traveled to China or had contact with someone who had traveled to risk areas. "This case tells us that we have to change the way we respond" to the spread of the virus. Dr. Cody drew a scenario in which schools will have to get used to missing students and workers will have to do the tasks they can from home. "I understand that this situation may seem overwhelming and it is difficult to think about the ways in which this can alter our daily lives, especially because we don't know yet how it will be." Until last day 26, the CDC had confirmed a total of 61 cases in the United States. Of these, 46 are people repatriated from contagion areas, mainly from Wuhan, in China, and from the Diamond Princess cruise ship, where an outbreak emerged when it was off the coast of Japan. The other 15 cases are infections diagnosed within the United States: 12 people who had traveled to China and 2 spouses of people who had traveled to China. The figure includes the first confirmed case in California of unknown origin. The other three are pending official confirmation. First case That first case was a woman admitted on February 19 at the hospital in Vacaville, a town north of Sacramento. The woman was taken to the university hospital in the capital of California, when her symptoms worsened. The county authorities did not request a proof of Covid-19 from the CDC until day 23. According to the federal agency, they received the samples on the 25th and confirmed the diagnosis on the 26th. All personnel who have been in contact with the patient are in observation. The second case was an older lady with previous illnesses living in Santa Clara. In California there are 8,400 people under observation for possible spread of the virus, the governor Gavin Newsom said Thursday. "We knew this was inevitable," he said of the situation. The governor said the state is not sufficiently equipped to diagnose all cases because it only has 200 diagnostic equipment prepared by the CDC specifically to detect the new coronavirus, and said the federal institution will send sooner. "People's restlessness is understandable and we are not reacting more or less," said Newsom. The CDC has sent teams to California to investigate in depth all the contacts of the new patients. In addition, on Saturday he announced that he will allow private laboratories to develop their own diagnostic tests for coronavirus. Around 80 private companies had requested permission to market tests that are already created. The patient infected by an unknown source in Washington State is a high school student north of Seattle. He went to the doctor with the usual symptoms of fever and muscle aches. According to health authorities, he returned to class when he began to feel better, before it was found that he was infected with the new coronavirus.

stop votes winner @snapple.

v2 blur,text

start votes v1 v2