Mr.dada

Well they say that pets resemble their owners, especially since each one takes care of his dog or cat as much as he does with himself. And in this time of New Year's resolutions, one of the most common is to lose weight and take care of health; which implies, in addition to greater physical activity, eating healthier and more balanced. Therefore, why not add your pet to this challenge to lose weight and take care of the line? To achieve this, it is clear that constant physical activity is equally important for pets and humans; But just as relevant is a low carb diet and nutritious and natural ingredients. That is why in EL PAÍS Showcase we have selected 10 foods and accessories on the zooplus.es website to help your dog or cat take care of itself, recover the line and stay in shape. In addition, you can enjoy a 5% discount throughout the store with the ZOOPLUS-REBAJAS coupon, for purchases over 59 euros (until January 31). DOGS I think without cereals of 3 kg Wolf of Wilderness In nature, wolves - descendants of dogs - do not consume cereals, but a diet based on fresh meat, red fruits, roots and wild herbs. That is why these ingredients have been chosen in the preparation of this feed, free of carbohydrates - with the exception of potatoes -, which provides nutrients, minerals and vegetable fibers to your pet. You can find it in varieties such as salmon, deer, lamb, wild boar, duck, chicken or beef, as well as in other presentations. 33% discount, save 6 euros. Concept for Life Veterinary Diet Weight Control One of the main causes of overweight in dogs is a high energy intake, in combination with a low amount of physical activity, to a greater extent if they are sterilized. To avoid diseases related to this condition, such as diabetes, feed your pet with this dietary supplement, made with natural fiber that provides a feeling of satiety and promotes a balanced digestion. In addition, it does not contain carbohydrates. The brand also offers other foods for dogs with kidney, intestinal or allergic problems. Northmate antivoracity feeder Gases and other digestive disorders in dogs are usually related to the voracity with which they eat their food. The goal of this feeder, which is designed with different heights, is that your pet eats little by little, since it will make it take out the food in small portions. In addition, it will keep you busy and increase your enthusiasm for mealtime. 40% discount, save 13 euros. Nutrivet Carniking L-carnitine Another method to combat your pet's obesity is this food supplement for dogs and cats. It has a high content of L-carnitine (150 g / kg), a substance that stimulates metabolism and, therefore, helps burn fat quickly. In addition, it helps keep cholesterol levels at bay, conserve muscle mass and counteract cardiovascular disease. 46% discount, save 12 euros. Snacks nerve ox Rocco Naturals Consenting your pet with rewards does not necessarily mean giving you high calorie foods. These snacks are dried natural ox nerves, which are dried in the oven without smoking. Thanks to this process, they are crispy and do not need preservatives or artificial colors. In addition, they contain a large amount of protein and are low in fat, so you can offer them to your pet at any time. CATS I think with poultry without cereals Feringa Feed made from cereals, containing high levels of carbohydrates, contributes to overweight cats with little physical activity. That is the highest quality of this food, developed especially for sterilized cats, since its combination of tender poultry with pumpkin, cranberries and a touch of mint is free of cereals, so it helps control weight. Concept for Life mixed feed pack If your cat usually has problems of intolerance or digestibility with food, Concept for Life products may be the solution. Since meat is their main ingredient, they have a balanced and optimal nutritional composition. This pack includes 400 grams of feed plus four sachets - 85 grams each - of wet food, two with sauce and two with jelly. There are four varieties available: for sterilized cats, sensitive stomach, ideal weight or kittens up to 12 months. Cat in Motion cat wheel Even if they have scrapers and toys at home, cats cannot exercise freely as they do outdoors. Therefore, this wheel is an ideal complement for physical activity to become part of your pussy's daily routine. Its structure will allow you to frolic and exercise whenever you want, it has a large diameter to protect your back and is covered with EVA rubber that ensures a good grip. Cosma Soup Pack Made with ingredients such as chicken breast, fillets, salmon and tuna, and complemented with a vegetable garnish (carrots, squash, sweet potatoes or zucchini, depending on the variety), these soups are carbohydrate-free, since they do not contain cereals. Therefore, in addition to being a natural food supplement, help your pet maintain the line in a healthy way. The package includes four mixed envelopes. Freeze-dried Zoolove chicken snacks Do you want to give your cat the best? These freeze-dried snacks - without water to preserve flavor and nutrients - are made with 100% best quality chicken. Therefore, they do not need additives, preservatives or dyes, and they become a natural and healthy snack for your pussy. In addition, when buying this product, 10% of the sale price goes to an animal shelter.

v1 text effect and blur

Resident Evil 1..2.3.4.5 Metroo2033 GTA V5 Call of Duty black op3 Call of duty BO 2 Call of duty BO 1 Halo 1 Halo 2 New will Coming Soon!

welcome

welcome

My last post, part 4 in the GPIO Programming series, showed some ways to program GPIO from Python. Python offers a number of advantages as a programming language including a short learning curve, no need for compilation, and the availability of many add-on modules. However, true compiled languages like C or C ++ can offer some advantages in embedded applications, such as higher performance. Because you are working closer to the level of the hardware you don't have to worry about what a JIT compiler or interpreter might be doing. If desired, you can look at the compiler's generated code or even use in line assembly language. There is also no need to ship full source code to end users. That said, you still should not expect to do hard real-time programming under a standard Linux-based system. But you often can do soft real-time, such as reading buttons and slow sensors, driving LEDs, motors, etc. In this installment we'll look at a couple of ways to control GPIO hardware from the C programming language. The examples will also be valid C ++ programs. Note that if you want to try running this program, it is recommended to run it as root, otherwise you may run into file locking timing issues with udev that cause access errors. I did some benchmarking of this example on a Raspberry Pi 3B. With delays removed, it would toggle the GPIO pin at a rate of about 350 kilohertz. This gives some idea of what can be done at this level of programming. Without using other programming tricks, there is no guarantee that the program won't be periodically preempted to run other tasks. The size of the binary when optimized and stripped was about 6K. and it had few dependencies on other shared libraries. This is several orders of magnitude smaller than Python, for example. The Raspberry Pi also has hardware support for PWM on some pins, and other features that can help optimize programs like this, and there are other performance optimization techniques like direct GPIO register access. We may look at this in a future post. WiringPi WiringPi [1] is a GPIO access library for the Raspberry Pi. Written in C, it is usable from C or C ++ or any language than can call C APIs. Third party bindings for a number a number of languages including Ruby, Python, and Perl are also available. Released under a GNU LGPLv3 license. it is available from Raspbian Linux or you can build it from source. It supports a similar API to the Wiring IDE supported on Arduino microcontrollers, making it easier to port hardware control code between the Raspberry Pi and Arduino platforms. As well as the Raspberry Pi GPIO pins, it also supports some add-on boards like the PiFace and Gertboard. The gpio command we looked at in an earlier blog post is part of WiringPi. The library provides basic functions to read and write pins, including pullup and pulldown resistors and hardware PWM. It also provides routines for software delays down to the microsecond level. There is also support for higher level protocols including serial, SPI, and I2C. In practice, WiringPi is very easy to use. Functions are defined in the header file <wiringPi.h>. You call a setup function to initialize the library, set the GPIO pin modes, and then call methods to read or write. The trickiest issue is probably getting the pin numbers correct - WiringPi uses a pin numbering convention based on the Broadcom SOM channel names, not physical pins. The documentation covers this (and the command gpio readall will also show it in tabular form). There is also a function you can call to convert physical pin numbers to WiringPi numbers. I did a few performance measurements on the code in demo2.c. Running the loop with no delays produced a GPIO pin cycling at a rate of almost 12 MHz on a Raspberry Pi 3. The main reason for the high performance is that it uses direct register access to avoid the kernel / user space context switching and other overhead needed with sysfs. Using delays of delayMicroseconds (10) produced a very consistent and accurate 50 kHz square wave. Conclusions These examples, implemented in C or C ++, are more representative of how commercial and industrial embedded applications are usually written. The resource requirements are significantly lower and performance is higher than when using Python or other interpreted languages. The cost is the additional complexity in programming and building. I highly recommend using WiringPi as it is high performance and provides a nice API for programming. It's main downside is being tied to the Raspberry Pi platform. Shortly before I wrote this blog post, the new Raspberry Pi 4 was released. This model is approximately three times faster and has a number of features and performance improvements. Initial benchmarks indicate it is significantly faster at GPIO handling than the Pi 3. The new model needs new version of the WiringPi, which was available on release day of the Raspberry Pi 4, but not yet included in Raspbian Linux as a package.

Microsoft will not provide new malware signatures for its home-grown Security Essentials software after it retires Windows 7 in five weeks. "No, your Windows 7 computer is not protected by MSE ((Microsoft Security Essentials)) after January 14, 2020," the company said in a support document mainly concerned about the Extended Security Updates (ESU) being shilled to enterprises. "MSE is unique to Windows 7 and follows the same lifecycle dates for support." [Related: Windows 7 to Windows 10 migration guide] Security Essentials, a free antivirus (AV) program that launched in 2008, was originally limited to consumers. However, in 2010, Microsoft expanded the licensing to small businesses, defined as those with 10 or fewer PCs. Two years after that, MSE was replaced by Windows Defender with the launch of Windows 8. [Got a spare hour? Take this online course and learn how to install and configure Windows 10 with the options you need. ] Since then, Defender has been baked into each follow-up version of the OS, including Windows 10. Windows 7, though, has been stuck with MSE. Computerworld previously speculated that Microsoft would provide updates to MSE even after Windows 7's retirement, slated for Jan. 14. The forecast was based on Microsoft's behavior five years ago, when it kept cranking out malware signature updates for Windows XP users of MSE in the months after that operating system's April 2014 retirement. What Computerworld neglected to consider, of course, was that in 2014 MSE still had a large pool of users or potential users, those running Windows 7. Because Microsoft was still required to produce MSE signature updates for Windows 7, there was no, or little extra work needed to push the same updates to XP. That's not the case now; Windows 7 is the end of the line for MSE. Without question, it would be in Microsoft's interest to continue updating MSE on Windows 7 after Jan. 14; Unprotected systems threaten the Windows ecosystem as a whole, because exploitation of, say, one Windows 7 PC could lead to the compromise of several other devices on the same network, such as one connecting the machines of a small business. But Microsoft has presumably weighed that against its desire to induce customers to upgrade to Windows 10 and found for the latter.

¤ Name[/nickname]:dada ¤ Age:17 ¤ Country:pakistan ¤ Occupation:college ¤ A short description about you:hate fake friends ¤ How did you found out Csblackdevil Community:- ¤ Favorite games:cs warzone ¤ Favorite server [community only]:- ¤ A picture of you:-