FNX Magokiler

For various reasons, for many years on certain occasions we have opted to use a file compression program. These offer us some interesting functions to better manage our contents, as is the case with the WinZip program, for example. In the Internet era in which we find ourselves, compressed files will be of great help to us to share large amounts of files, for example. At the same time we use these useful programs to make backup copies that we are going to store, or in order to save disk space. We must bear in mind that while a few years ago it was about programs focused solely on compression and decompression, today they go a step further. Aware of its importance, developers of applications like WinZip try to take their projects to a higher level to make them more useful. We find a clear example of all this with this native format that some of you may not know. And it is that on certain occasions we can find a compressed file in ZIPX format, so we do not know what the advantages or disadvantages of this file are. This is precisely what we want to clarify in these same lines. What are ZIPX files and what can I use them for? Well, at this point we will tell you that a file in ZIPX format is a compressed file created in the aforementioned WinZip program, but somewhat more advanced. We say this because for the creation of this the user has used one or several of its advanced compression methods available in the application, we comment on them. There are several advantages offered by this particular format and why it is sometimes used. For example, ZIPX is used if we are going to share this file in the future and we need a higher level of compression than usual. In short, we could say that we use this particular format to obtain smaller files than using the conventional ZIP format. This way we will obtain more optimized files to share with others or store saving disk space. Of course, despite the advantages that its use offers us, we are also going to find some inconveniences when working with this format. This is something that directly affects the compatibility of the file with which we find ourselves. We mean that to unzip a ZIPX now or in the future, we will need to have the WinZip application. This is something that can also be extended to other programs that are compatible with this format. However, the availability of these is lower than if, for example, we have used a conventional ZIP. Also, we could say the advanced compression methods used in ZIP files are based on the original open source ZIP file format, but with better results in terms of data compression. At this point, many of you may be wondering why this more effective type of file is not always used. Well, its decompression can take a little more time in the process, and also not all programs with these characteristics are compatible with it. This means that sometimes the receiver receiving the file may have problems accessing its content.

In recent years, the euphemisms artificial intelligence, Deep Learning and other magic words have been no other way of calling the addition to the hardware of a new type of unit capable of performing mathematical operations with matrices at high speed. Well, against all odds, AMD has hidden a detail in its graphics processors with RDNA 3 architecture that has to do with it. They are the so-called WMMA instructions and they bring a very important change, hitherto unheard of in AMD gaming graphics cards. Those of you who are more veterans will remember how in the 90s the word multimedia resonated as much as artificial intelligence today. The reason? The addition of SIMD units in the processors of yesteryear. Today the same is happening with the calculation of matrices and artificial intelligence. Well, AMD would have finally adopted these units in its domestic GPUs, after four years since NVIDIA will launch its first RTX with them. A unit to operate with matrices One of NVIDIA's spearheads in its GPUs is the addition of the so-called Tensor Cores to the RTX, which are nothing more than a type of execution called a systolic array. Its main advantage? The ability to operate with data arrays at high speed. These types of mathematical structures are crucial for artificial intelligence algorithms and for being able to store large amounts of data. What is an image for example? An array of pixels. Since a matrix is nothing more than a vector of N dimensions, up to now vector units or SIMDs have been used to carry out these operations, which can execute the same instruction in parallel with several different operands. However, even though they can execute such instructions, they are much slower to do so than what we call a systolic array. Well, with NVIDIA having their Tensor drives and Intel having added their XMX, which are just trade names for the same concept, the one that was missing was AMD. In any case, the absence has been rather in its GPUs for home computers and workstations. Since in the world of high performance computing or HPC, their CDNA-based AMD Instinct has been with these drives for a long time. WMMA, Matrix Core Units for the RX 7000 The name that AMD gives to its systolic arrays is Matrix Core Units, which have been unprecedented in RDNA and RDNA 2. Well, after several rumors that AMD would not bet on this type of unit in its GPUs, it turns out that in the LLVM repository there are references to the inclusion of WMMA instructions for GFX11, which is how AMD calls the RDNA 3 architecture of its future GPUs such as the RX 7000 and processors such as Phoenix. In the repository the acronym WMMA is described as Wave Matrix Multiply Accumulate and is described as: These operations perform matrix multiplication and addition in the form of: D = A*B+C. Which reminds us of the structure defined by NVIDIA to describe its Tensor Cores. Moreover, as you can see, AMD's rival company also used the WMMA concept. Furthermore, the adoption in AMD GPUs of this type of unit is revealed with a diagonal look at the source code. The resulting matrix (D) given in 32-bit or 16-bit floating point and the 3 matrices operating in 16-bit floating point or BFLOAT16 format. The final value of D being in 32-bit integers, and A, B, and C in 4- or 8-bit integers. So in summary: we find that AMD has added the WMMA instructions in RDNA, which refer to the addition of a unit to operate with matrices, that is, AMD GPUs will finally have their own Tensor Cores. Which are highly used in the world of artificial intelligence and were one of the elements

Parliamentarian Miguel Becker also sent an official letter to the Government so that more background information on the matter could be provided. The deputy for the Region of La Araucanía, Miguel Becker, asked the Chamber's Defense Commission for a special session to review the reason for the constant flights between Caracas and Santiago, by a plane from the Venezuelan state airline Conviasa. The parliamentarian requested the meeting after the doubts that arose in Argentina about the presence of a plane from the same airline in Buenos Aires, which was seized with 14 crew members inside, five of whom are Iranians with alleged terrorist links and the rest appears linked to the regime of Nicolás Maduro. The Conviasa plane that passed through Chile would have landed on June 23 in Santiago, generating various comments and concern among authorities and, particularly, parliamentarians. This is due to the judicial situation of the ship held in the neighboring country, about which there was an international alert launched by Paraguay and Uruguay. In this context, Becker requested the Government, through the Ministry of the Interior, to investigate and provide precise information regarding this information that has already spread to the media in Chile and also in Argentina, where there is also a landing of an aircraft with similar characteristics. "The coincidence between both situations (Chile and Argentina) and the need to prevent acts of terrorism in our national territory, as well as to clear up any doubt about the reason for these flights and the integration of their crew, forces us to request all the necessary information and ask for a special session on this," he said. In the legislator's opinion, "it may be a complex and delicate issue that our country is being visited by planes and groups with weapons and terrorist groups," for which he indicated that he will request that Defense Minister Maya Fernández be summoned to the session. , and the Undersecretary of the Interior, Manuel Monsalve. It should be remembered that a few weeks ago the deputy had officiated to the Ministry of the Interior and the National Migration Service to adopt the necessary measures to prevent the arrival in the national territory that are accused of belonging to terrorist groups. The YV3533 patent aircraft, belonging to Conviasa and previously to Mahan Air-both companies sanctioned by the United States, would have returned to Caracas without being held on Chilean soil. https://www.emol.com/noticias/Nacional/2022/07/02/1065793/diputado-rn-sesion-avion-venezuela.html

The French brand DS Automobiles announces a collaboration agreement with Beat in its new Beat Zero service, an electromobility application initially available in some districts of Santiago. The luxury firm of the Stellantis Group delivers a fleet of 120 units of its first 100% electric model, the DS 3 Crossback E-Tense, which began sales in Chile last April. The agreement between DS Automobiles Chile and Beat includes the after-sales service by the brand, which will be carried out in the new Beat Zero Hub inside the Mall Plaza Los Domínicos (Las Condes). Likewise, for months now, a comprehensive training process has been carried out for drivers so that they know the technological vehicle before use. The French brand aims to be a 100% electric brand by 2030, and in this process, collaborate in the complicated electrification processes in all the markets where it participates, including Chile. The most relevant is the launch of electrified models such as the 100% electric DS3 Crossback E-TENSE and the DS7 Crossback E-TENSE 4x4 plug-in hybrid SUV. Both are already on sale in Chile, and as of May this year, it led the zero-emission car market with 19% of total electric car sales in Chile. “In line with the commitment of DS Automobiles worldwide, our focus is on being a leading brand in electromobility in Chile. The benefits of the DS 3 Crossback E-Tense are based on the design, its cutting-edge technology and habitability, since it does not lose interior space due to batteries. The power plant is based on developments gained from our experience in Formula E, a competition in which DS Automobiles has been world champion twice. Our ambition is to remain the leading brand in the 100% electric segment this year in Chile and to be a relevant player in the development of electrification in our country," says Nicolás Eyzaguirre, commercial manager of DS Automobiles Chile. For DS Automobiles, this agreement with Beat represents the first step in an aggressive strategy to introduce its new generation electrified vehicles, offering unique services for private customers, and high degrees of flexibility to adapt to all the requirements of different companies. The new DS 3 Crossback E-Tense This first 100% electric vehicle of the brand uses the CMP multi-energy platform of the Stellantis Group, and moves thanks to its 136 Hp motor and 260 Nm of torque, which is powered by its 50 kW battery. With this package, the DS 3 Crossback E-Tense offers a range of up to 320 kilometers on one charge (WLTP cycle), and allows 100% recharging processes in 6.5 hours on a home power outlet (7.4 kW ), and to 80% in 25 minutes in a fast tap of between 50 and 100 kW. In Chile, the model is offered with a premium audio system with 8 speakers, DS CONNECT NAV infotainment system with connectivity to Apple CarPlay and Android Auto, 10.3-inch touch screen, configurable 10-inch digital markers, automatic climate control, hands-free with ignition button, two-tone bodywork with tinted rear windows and 18-inch wheels, among others. In terms of safety, it stands out for the front and rear sensors with 360° camera, DS MATRIX LED headlights, front, side (4) and curtain airbags, traction and stability controls, hill start assistant and involuntary shift warning of lane. In addition, it adds some driving assistance (ADAS) to the equipment. To facilitate charging processes, DS Automobiles has an alliance with COPEC Voltex, which is exclusive for retail customers, for the feasibility analysis and installation of chargers in homes, at a preferential price of $1,170,000 + VAT. The 100% electric DS 3 Crossback E-Tense SUV is marketed in Chile in two versions differentiated by style and equipment: Bastille and Louvre, priced at $39,990,000 and $40,990,000. https://noticias.autocosmos.cl/2022/07/01/ds-automobiles-entrega-flota-de-su-ds-3-crossback-electrico-a-beat-zero

The authorities say that with this they will try to manage the flow of visitors who often outnumber the inhabitants, preventing movement on foot in the alleys and pedestrian bridges. Starting in January, Venice will force "fleeting" tourists - who stay in the city for just one day - to make reservations and pay fees to visit the historic city of canals. The new rules were announced on Friday and will take effect on January 16, 2023. Authorities say they will try to manage the flow of visitors, who often outnumber the inhabitants, preventing movement on foot in alleys and pedestrian bridges. Tourists who choose not to spend the night in hotels or other accommodations will have to make an online reservation, indicating the day of the visit, and pay a fee of between 3 and 10 euros (3.15 and 10.5 dollars) per person. , depending on whether it is done in advance, if it is the high season or if the city is crowded. Violators can pay fines of up to 300 euros ($315) if they are caught without having paid for their reservation with a QR code. About 80% of tourists go to Venice just to spend the day. In 2019, the last full year before the pandemic, some 19 million day trippers visited Venice, earning just a fraction of the revenue of those who spent at least one night. Venice's tourism commissioner has rejected the idea that the measure is intended to limit the number of outsiders who go to Italy's most visited city. "We are not talking about reductions in numbers. We are talking about incentives and disincentives," Simone Venturini told a news conference. He had been talking about the reservation and the rate for a few years, but it was put on hold during the pandemic. With the covid-19 restrictions, tourism almost disappeared from Venice and residents were able to enjoy their city for the first time in decades. Mass tourism began in the 1960s. Visitor numbers steadily increased while residents dwindled, weighed down by congestion, the cost of delivering food and other goods in a city without cars, and frequent floods that damage homes. and business. Since those who stay in hotels and pensions pay a tax for it, they are exempt from reservations and the fee. Others exempt are children under the age of 6, people with disabilities, and owners of vacation homes in Venice who pay property tax. Excursionists arriving on cruise ships will have to pay, unless the cruise company pays a fee to the city. https://www.emol.com/noticias/Internacional/2022/07/02/1065789/venecia-turistas-reservas-pagar-tarifas.html

welcome 🙂

One of the main objectives we seek when we sit in front of our computer and its operating system is to work as smoothly as possible. This is something that is extensible to most of the software that we use, so we are going to see how to achieve it if we use Linux. Our productivity and user experience in daily work with a computer will depend to a large extent on how we handle the aforementioned system. For all this, the aforementioned experience is of enormous importance, as well as various configuration parameters that we ourselves carry out. All this in order to work on the Linux system and its corresponding programs in the most fluid and comfortable way possible. In addition, this is something that we try to achieve both professionally in our work, and when we are at home sitting in front of the computer. We usually configure the software to adapt its functions to our needs. If we focus on the operating system as such, here we can use a series of keyboard shortcuts that will help us with these tasks. As in other similar proposals such as Windows, Linux has a good number of key combinations. These allow us to carry out a multitude of actions in the software itself in a much faster and more fluid way. The truth is that memorizing all these keyboard shortcuts is quite a complicated task. Hence, we have the possibility of learning the most used, or even personalizing them. With this, what we want to tell you is that we have the possibility of modifying the default keyboard shortcuts and establishing new ones. Customize these keyboard shortcuts in Linux to gain speed The first thing we should know is that to change these Linux keyboard shortcuts that we mentioned, in the first place, we only have to click with the right mouse button on the desktop. This will allow us to access the operating system configuration window where we find a Keyboard or Key Combinations section. It must be said that in this section we find an extensive list of functions integrated into the system and their corresponding key combinations. We only have to click on each of them in order to establish a new keyboard shortcut. Once we have reached this point, we are going to show you some of these combinations that we recommend you change to be faster and more productive in Linux. We are going to show you the default key combination and its functionality so that you can customize it to your liking. Ctrl + Alt + Delete: close the current session. Ctrl + Alt + T: Open a new terminal window. Alt + Shift + Tab: quickly move between open applications. Ctrl + Alt + up and down arrows: move between desktops. Alt + F2: Open the Run box. Alt + F8: resize windows. Ctrl + ImpPnt: copy a screenshot to the clipboard. Shift + Ctrl + Alt + R: make a recording of the desktop. Alt + F4: close the active window. Alt + F1: show the activities view.

If you are looking for a gaming graphics card, it may be that this one that we bring you today may interest you a lot. We are talking about an Inno3D graphics, which is based on an NVIDIA RTX 3060 GPU from the RTX 30 Series family. Therefore, this graphics card offers us support for DLSS and Ray Tracing. Now this graphics card is 27% off. The Inno3D RTX 3060 Twin X2 OC 12 GB GDDR6 graphics card, a graphics card clearly focused on the mid-range. By having an NVIDIA silicon, we will have support for Ray Tracing and DLSS technologies, in addition to other company technologies. It also stands out for its compact dual-fan design. Inno3D RTX 3060 Twin X2 OC 12GB GDDR6 The Inno3D brand may not be familiar to you, as it is less well known than other manufacturers. The truth is that it is a fairly good brand that is characterized by offering good products at a reasonable price. This graph also stands out for dispensing with things such as RGB lighting or an excessively large heatsink. This RTX 3060 Twin graphics card features an NVIDIA GA106-300-A1 silicon. This chip is characterized by offering 3584 CUDA Cores, 112 TMUs, 48 ROPs, 112 Tensor Cores and 28 RT Cores. We are talking about plenty of power to move games in 1080p and 1440p resolutions. It will also offer us good performance in games with ray tracing and to compensate for the loss we have the rescaling technology. Regarding the frequencies, this graphics card works at a base frequency of 1320 MHz and in Boost mode it reaches 1792 MHz. This graphics card has a little overclocking with respect to the reference model (NVIDIA reference frequency: 1777 MHz). The graphics card has 12 GB of GDDR6 memory which works at an effective frequency of 15 Gbps. These memories have a 192-bit memory bus and a bandwidth of 360 GB/s. The fairly simple heatsink selected by Inno3D stands out from this graphics card. This cooler is two PCI slots thick, when most graphics fans are already larger. To help dissipate heat, it has two 90 mm fans, more than enough. It has white lighting on the side, on the brand name and nothing else. About the video outputs, this graphics card has an HDMI 2.1 and three DisplayPort 1.4a. The graphics card is powered by a single 8-pin PCI connector, for an effective consumption of 170 W. Good option for eSports games or enjoy Ray Tracing Something that we have commented is that thanks to the fact that the GPU is manufactured by NVIDIA, it offers support for many of the company's technologies. Beyond NVIDIA Ray Tracing and DLSS, it offers support for Reflex technology and G-Sync. Two technologies that are very interesting, especially for those who want to play competitively. NVIDIA Reflex, simply put, reduces internal hardware latency as much as possible. G-Sync, on the other hand, allows you to adjust the refresh rate of the monitor to the FPS rate offered by the graphics card in real time. We have to say that it is a very good graphics card offered by an assembler with years of experience. The price is very good, being within acceptable parameters, within the situation that we find ourselves with respect to the gaming graphics market

The president of the United States, Democrat Joe Biden, respects the country's Supreme Court and does not question its legitimacy despite the decision to revoke legal protection for abortion, which he called "terrible, painful and devastating." After a journalist asked if the president questions the legitimacy of the Court, White House spokeswoman Karine Jean-Pierre assured that Biden sees the Supreme Court as legitimate and that he respects it. "What he believes is that this particular decision that was made is extremist and out of place, and this is something he will continue to say. But obviously he sees the Court as legitimate and respects it," Jean-Pierre told a conference. press conference aboard the presidential plane Air Force One, in which Biden traveled to Europe to attend the G7 and NATO summits. The Supreme Court ruling was approved with the support of six of the nine judges of the highest US judicial instance and upholds a Mississippi state law that restricts abortion after 15 weeks of gestation. However, the conservative majority of the Supreme decided to go further and revoke the precedents established in the past by the court itself that protected that right. With yesterday's ruling, the states that so decide will be able to totally ban abortion. While Democratic senators Elizabeth Warren and Tina Smith called on Biden to declare a public health emergency to protect access to abortion. "We urge the President to declare a public health emergency to protect access to abortion for all Americans, to unlock resources and authority so that states and the federal government can meet the increased demand for reproductive health services." , note the senators in an opinion piece published in The New York Times. In this published text, the policies also encourage Americans to vote for Democratic candidates in the legislative elections next November in order to try to reverse the decision of the Supreme Court with a federal law. "If voters help us keep our control of the House and expand our majority in the Senate by at least two votes this November, we can make Roe ("Roe v. Wade" is the case that legalized abortion) law across the country. country in January," they note. Until now, nine states of the 50 that make up the country have prohibited the interruption of pregnancy this Friday as soon as the Supreme Court's decision was known, while another 14 states could do so in the short term. Warren and Smith also emphasize in their writing that "a large majority of Americans oppose the decision that the Supreme Court has just made" and that "almost two-thirds of Americans believe that abortion should be legal in all or in most cases." "In short: we must restore our democracy so that a radical minority can no longer stifle the will of the people. This will be a long and hard fight, and the road to victory is not yet certain. But it is a fair fight that we must win." No matter how long it takes. We both live in an America without Roe, and we're not going back. Not now. Ever." Warren has represented Massachusetts in the Senate since 2013 and Smith has represented the state of Minnesota since 2018. https://www.emol.com/noticias/Internacional/2022/06/26/1065166/biden-suprema-senadoras-aborto-emergencia.html

Porsche already has its new vehicle ready to compete in the endurance championships during 2023. This could be seen during the Goodwood Festival of Speed, in the United Kingdom, where the Porsche 963 GTP from Porsche Penske Racing made its public presentation. In this hypercar Porsche includes many references to historic Porsches, especially with its iconic red, white and black paint scheme. The brand says that the 963 GTP (Grand Touring Prototype) is inspired by the Porsche 956 and 962 that raced during the 1980s. The new 963 GTP has aerodynamic channels inside the wheel wells and other aerodynamic solutions such as the fins on the roof, also adding a single line of LED taillights that completes its belonging to the brand, with a clear nod to Porsche. current production. As for how it fares against the competition, Porsche revealed that the car has already tested 7,889 kilometers. This is important if we look at what brands like BMW and Cadillac are doing, which have barely shown some images and apparently none have touched the asphalt yet. News from Alpine and Lamborghini are also expected, although these brands are not expected for 2023 but only for 2024. The reason behind Porsche's leadership in the development of this vehicle has to do with Porsche and Penske agreeing to take the lead in homologating the physical car and hybrid powertrain. This gave the team a huge advantage in testing, but has the downside that in development, Porsche had to share its data with competitors in the category to help them with their builds and implementation of the series-spec hybrid powertrain. The Porsche 963 GTP is animated thanks to a hybrid system whose main driver is a 4.6 L V8 biturbo engine, (taken from the 918 Spyder) with a limited power of 680 Hp and is coupled to some standardized components from Bosch, Williams Advanced Engineering and Xtrac. . Alongside the 963 GTP's debut at Goodwood, Porsche also revealed its drivers to compete in both the WEC and IMSA series, with names including André Lotterer, Laurence Vanthoor, Matt Campbell, Mathieu Jaminet, Michael Christensen, Kévin Estre, Dane Cameron and Philip Nasr. The Porsche 963 GTP is expected to make its official track debut in January 2023 at the Rolex 24 at Daytona. Porsche also says there will be a "non-competitive dress rehearsal" for the car at the final round of the WEC season in Bahrain later this year, scheduled for November 12. https://noticias.autocosmos.cl/2022/06/24/conoce-al-963-gtp-el-auto-con-el-que-porsche-ira-a-le-mans

"The objective is to be able to guarantee security conditions and recover public spaces that belong to the people of Chile and that cannot be taken over by criminal organizations. There will be a decision to establish a very decisive police presence in terms of preventive work, but also to recover the presence of the State there". Through these words, on May 16, the Undersecretary of the Interior, Manuel Monsalve, announced a security plan that sought to intervene in the Meiggs neighborhood, as a result of the acts of violence that occurred in the commercial sector, as was the murder of Francisca Sandoval. This Wednesday, June 22, and more than a month after the start of the operation of this security measure applied in the Meiggs neighborhood, the National Director of Police Order and Security, Inspector General Marcelo Araya, reported the progress of this plan: 170 people arrested, 157 awnings or structures of itinerant commerce removed, and 23,313 preventive controls. In this line, the high command mentioned that from the institution "we have continued from the beginning with our presence and planning in what is the intervention of the Meiggs neighborhood to achieve the restitution and recovery of public spaces, which are of interest to all But in parallel, with another strategy that is the Metro service and other spaces also in which work must be done with other organizations that must participate in this instance". As pointed out by the uniformed officer, Metro de Santiago also plays an important role in this recovery plan for the spaces, a product of itinerant commerce that is installed in several stations. Moreover, since the announcement of the intervention in the Meiggs neighborhood, the company has carried out operations, together with Carabineros, to supervise and control unregulated vendors that operate within public transport. Critical stations and progress of the Metro plan Within the framework of the intervention and recovery of the Meiggs neighborhood, on May 20, Metro de Santiago reported that in the Estación Central, Unión Latinoamericana and Universidad de Santiago stations, belonging to Line 1 An operation between Metro officials and Carabineros was applied so that users have "safer and more expeditious spaces." In this way, the street vendors were removed from those stations, which now have a permanent police presence during operating hours, since those three are considered critical when it comes to the illegal sale of products. However, from Metro they pointed out to Emol that "work is being done to extend this special plan to other stations in the network." Regarding the control plan for itinerant commerce inside the stations, from the underground train they explain that "Metro security teams are permanently coordinated with Carabineros, who remain in our Control Center during all service hours." "In this framework and in line with the announcements made by the authority regarding the reinforcement of security, Metro, in coordination with Carabineros, is developing a plan at specific points of the network," they add from the company. However, the control of itinerant commerce inside the stations did not begin as a result of the Meiggs neighborhood intervention plan. Moreover, from Metro they reported that in 2021 39 thousand controls were carried out. While, between January and May 2022, there are already more than 18,226, a figure that in the same period last year was 11,952. In that sense, they clarify that "only Carabineros can confiscate products and issue fines." "However, and despite the controls, this phenomenon becomes recurrent, since it is a problem at the city level and even at the country level and, as such, at Metro we are not oblivious to it. In addition, in order to address this problem in a comprehensive manner, we have special spaces in different stations of our network for the Mercado a un Metro initiative, which directly supports the business of entrepreneurs from different districts of the Metropolitan Region", they conclude. In this regard, Major María Campos, commissioner of the 60th. Metro Police Station commented to Emol how the institution operates in this coordinated work to remove illegal vendors inside the subway train, since the intervention in the Meiggs neighborhood was implemented. "The 60th Metro Police Station of Santiago de Carabineros, together with private guards, provide services in the Metro network, in order to prevent the installation of non-established businesses, through a service called 'eradication of itinerant businesses'. This service has the support of territorial units of the Metropolitan Zone of Police and Public Order Control personnel," explained the official. Specifically, and in accordance with what Major Campos pointed out, "the service has been running for two weeks, with a special emphasis on the Unión Latinoamericana, Universidad de Santiago and Estación Central stations, which are focused on the surface, around the Meiggs neighborhood sector, a place that maintains interventions by territorial personnel of the Central Santiago Prefecture". https://www.emol.com/noticias/Nacional/2022/06/26/1065047/avance-control-comercio-ambulante-metro.html

Nick : @Lexman. Grade : Co-Owner Reason : problems with manager (@Tw09), and admins insults and does not respect admins Warning: 1/4

Nick : Mr.Daniel Old grade : Owner New grade : Player Reason : Very bad activity in Server, My decision and he absent.

Welcome, family, good luck.

Welcome

Warning Model: Nick : Grade : Reason : Warning: Note: an administrator when he has 4 warning (4/4) will be suspended for 3 days. Note: 2 suspends equal removal (the second suspension is given directly without warnings for 5 days)

• Name: M@g0k1l3r • Time & Date: The Time: 25/06/2022 - 01:15:14 • Screenshot:

The price of Bitcoin, and therefore of Ethereum and other altcoins, has fallen below $24,000. It seems that there are different origins of this fall, some are within the cryptocurrency segment and others are external factors. But, we must see beyond the price of Bitcoin at any given time. As of this writing, Bitcoin loses over 14% over a 24-hour period and 26% over a 7-day period. Ethereum is having a worse time, since it loses almost 16% in a period of 24 hours and more than 36% in a period of 7 days. Bitcoin Price Falls Below $24,000 One of the reasons for this drop is that the fintech protocol Celsius has interrupted operations. It seems that he is currently in a rather negative situation. It is quite common for worthless protocols or projects to end up collapsing and dragging down Bitcoin and other cryptocurrencies. But there are other problems that are causing the sharp drop in Bitcoin. The international economic situation is far from good. Asian markets are selling futures and Wall Street futures are showing a bearish trend carrying over from last week. The United States is in a really bad economic situation. Inflation is of great concern, and everything is waiting for the United States Federal Reserve to release data on June 15. Perhaps one of the most interesting data is given by CrediBULL on its Twitter account. It highlights that it has gone from 11 million bitcoin in HODL to more than 13 million. This means that we are at a point of accumulation, not distribution. But the reality is that it is not being sold, nor has it been sold, on the contrary, there is an accumulation process. We must keep in mind that the price of Bitcoin is cycles. After hitting all-time highs (also called ATHs) there is usually a period of correction. It happened in 2016, when I hit $20,000 and then went down to $4,000. After hitting the $65,000 figure, we are in another period of price readjustment. Hash rate and commissions are other good indicators There are two parameters that show the good health of the Bitcoin network and that show that we must look beyond the price. We must distinguish between the value of the network and the market price, which are not the same. Something that is usually confused. If we analyze the Bitcoin hash rate or mining power data, the situation could not be better. In June 2021 we saw a hash rate drop of 60% due to the mining ban in China. As we can see in the graph, it is currently well above what it was before that event. Something that shows the good state of this cryptocurrency. Another piece of information is the Bitcoin transaction fees. Currently, the cost per transaction averages around 1.5 dollars. But not only the price of commissions is very low, the use of the Lightning Network has also grown. More and more users are betting on making transactions in the second layer of Bitcoin for having commissions of practically 0 dollars and being executed instantly. Maybe it's a good time to buy a few sats (the most basic unit in which bitcoin is divided). Always with a head, a small amount that we do not need in the short or medium term and that we can afford to "lose". We refer to losing a fall in price (such as this one) and whose amount has fallen with respect to the money invested.

Pro. Good activity you have to give it a chance

Today there are a lot of peripheral port hubs that still use USB 2.0 ports. These are ten times slower than the worst of the 3rd generation ports. Why is a type of interconnection with worse characteristics still being used after all this time? This interface should have been withdrawn from the market years ago, but even so, it is still used. Why? USB 2.0 ports are already over two decades old and USB 3.x are old enough that there has been a total replacement of these over time. Since that is what happened with the 1.x ports of the standard. However, we find that USB-C and USB 3.0 port hubs are still using them. Honestly, we all could use them if they were the SuperSpeed type. If you ask anyone about the existence of USB 2.0 ports today, then the typical answer is cost. Reality? If we are objective we will see that the costs of a USB 3.X port are at most cents higher than the 2.0. Although this is the fallacy of the olive on the plane menu. Such a level of savings does not make sense and ends up causing computers to end up with worse interfaces for peripherals. It is true that if we connect a keyboard, a mouse or some speakers they do not take advantage of a USB 3.X port, but neither does the 2.0. It is best if there are multiple ports with multi-gigabit per second transfer. However, we find that this is not the case. Why do USB 3.X hubs have 2.0 ports today? Well, believe it or not, it is not an economic decision, but a technical one. The 2.0 interface inside your USB 3.X or Type-C The key is in the way in which the pins or connectors are distributed in the third generation USB standard. Well, in order to transmit data at high speeds, the pins labeled TX and RX are used, but pins D+ and D– are not usually used to transmit information. The latter are the same data connectors as USB 2.0 Because most devices designed for USB 3.X, both Type A and Type C, do not use the D+ and D- pins, they are completely free to use. The peculiarity is that they are not switched between them. That is, the port can send and receive data from both the high-speed pins and the other pins at the same time. What do manufacturers do? Well, since they are not usually used in peripherals, what they do is derive a USB 2.0 port from each 3.x port, which is totally free. Since for each USB 3.X port that supports the high-speed USB controller, this is the reason why USB 2.0 ports are still used today. That is to say, it is nothing more than a collateral effect of the specification and will continue with USB 4, due to the fact that it is based on the same pin configuration as that of type C. The particular case of virtual reality glasses Actually the Data + and Data- pins are used in certain scenarios. This is in the case of USB-C that have the ability to transmit video through the DisplayPort protocol. Because the necessary transfer is very high, they make use of the SSTX and SSRX pins for this, so the data transfer ends up on the USB 2.0 pins. Devices that make use of this? Well, the headsets for virtual reality or HMD to be able to connect to the PC or the console with a single cable. While the image is sent, the D+ and D- pins are responsible for sending the information captured by the sensors integrated in the unit to measure and follow the movement of the controls and the player. As well as to power the internal hardware of the unit.