[Hardware ] Adata Falcon M.2 NVMe SSD Review: Soaring above SATA

[#Em i[N]O']

Adata’s Falcon is dressed to impress

 

 

Adata’s latest SSD, the Falcon, has flown into our lab in hopes of perching itself on our Best SSDs list. Adata’s Falcon sports multi-gigabyte per second performance and AES 256-bit encryption support for added security, but it also has stunningly good looks that are sure to complement the aesthetic of most builds. However, Adata’s Falcon isn’t the most responsive SSD available, largely because it lacks a DRAM buffer.

Adata’s Falcon is a compact M.2 NVMe SSD that the company claims is ideal for tasks like video editing, industrial drawing, and programming. Flaunting sequential performance figures of up to 3.1/1.5 GBps of sequential read/write throughput, as well as random performance of up to 180,000 read/write IOPS, it sure seems to fit the part performance-wise. But what really boosts potential prosumer adoption its hardware-based AES 256-bit encryption support. Adata’s Falcon can not only serve up data quickly, but it can also do so while keeping it secure.

 

Adata’s Falcon is available in capacities that span from 256GB up to 2TB and is priced very competitively, especially the higher-capacity models that land as low as ~$0.12 per gigabyte for the 1TB and 2TB models. The Falcon uses Low-Density Parity-Check (LDPC) ECC and comes with endurance ratings that are competitive with many high-end SSDs, like the WD Black SN750 and Samsung 970 EVO Plus, but it still trails some SSDs that come with Phison SSD controllers. The 1TB Falcon is rated to endure up to 600 TB of writes within its 5-year warranty.

Software and Accessories
Adata provides both an SSD Toolbox and cloning software. The SSD Toolbox allows you to monitor, diagnose, and update the firmware of your SSD as well as ‘optimize’ some system configuration settings. Acronis True Image OEM enables you to clone your data to your new SSD and also create system images for backup purposes.

 

 

A Closer Look
The Falcon looks like a piece of jewelry more than an SSD. Normally, the heat spreader on an SSD is more rugged and industrial than flashy, but the Falcon’s gold-finished aluminum alloy heat spreader and black PCB pair up nicely for an absolutely stunning look.

 

 

Realtek’s RTS5762DL, an 8-channel DRAMless PCIe 3.0 x4 NVMe 1.3 SSD controller, powers the drive. The chip leverages dual ARM CPUs, and it’s package dimensions are much smaller than the RTS5762 we tested on Adata’s XPG Spectrix S40G. Its overall size is comparable to Phison’s newly-shrunk E12S 8-channel NVMe 1.3 SSD controller, a clue that suggests that it is manufactured on a 12nm process node, too.

 

 

This RTS5762DL allows for manufacturers to mount up to four NAND packages on the same side of the PCB as the controller, enabling the Flacon to maintain a slim single-sided M.2 2280 form factor even at the 2TB capacity point. Our 1TB sample interfaces with sixteen of Micron’s third-generation 96L (B27B) TLC 512Gb NAND dies at bus speeds of 533-667 MT/s. Adata sets aside 7% of the NAND for overprovisioning.

 

 

While the RTS5762DL lacks DRAM for buffering flash translation layer (FTL) data, it uses NVMe’s Host Memory Buffer (HMB) feature so that the controller can use a few MB of the host system’s DRAM instead. While this presents a slight latency penalty due to the latency associated with communicating through the PCIe bus to the DRAM and back, overall performance is typically better than a DRAMless SSD without the tech. The drive also supports securing erasing via the Format NVM command, TRIM, and S.M.A.R.T. data reporting with a working temperature sensor.