Noticias ALEJANDRO Posted April 19, 2024 Posted April 19, 2024 To carry out this project, he has created two custom PCBs, cutting out all the elements of the motherboard to leave only what is essential for its operation and as a result he has obtained a board that measures only 62 x 62 mm that includes the CPU, GPU, RAM and the flash memory by eliminating the power connectors, USB, remote and Bluetooth ports to add them through two PCBs designed by him. By eliminating the controller connector, he added support for controllers through the headphone jack that must also be used in the GameCube controller connector, just like other similar projects have done to reduce the size of this legendary console. To dissipate heat, he has used a 20x20x8 mm fan that emits 0.84 CFM To create the box, he used a 3D printer. Unlike other projects where all components have been disassembled and reassembled, this design has been created completely from scratch to reduce the footprint of the Nintendo Wii to a minimum. All the steps that have been followed to carry out this project are available on the GitHub page of this project, but, if we do not have electronic experience, it is not recommended to carry it out since it requires the purchase of hardware and very difficult soldering. precise. James states that, despite occupying the same space as a deck of cards, it would still be possible to reduce the size they occupy by between 25 and 30% without losing any of the functionality it has, but it would be a very complicated process to carry out. due to the difficulty of assembling all the components. If you want to know more information about how this project has been designed and carried out, you can take a look at the project website through this link. Click
Premium
Recommended Posts