[Hardware] NVIDIA’s Next-Gen ‘Ada Lovelace’ GPU Powered Flagship GeForce Graphics Card Rumored To Feature AD102 GPU, 21 Gbps Memory, 24 GB Capacity & Up To 600W TGP

[Ga[M]er]

NVIDIA's Ada Lovelace GPUs will be coming to gamers later this year in the next-gen GeForce RTX graphics cards. These cards are expected to rock some extreme specs and some extreme GPU requirements to operate as detailed by Kopite7kimi in his latest round of leaks.

NVIDIA's Next-Gen Flagship GeForce Graphics Card Detailed: AD102 GPU, 24 GB & 21 Gbps Memory, Up To 600W TGP
There might be a new rumor surrounding the naming convention used by the next-gen GeForce graphics cards with some now pointing towards a name change to GeForce RTX 50 series instead of the previously expected GeForce RTX 40 series. In the end, whatever NVIDIA decides to call the next GeForce lineup isn't as important as its underlying specifications.
NVIDIA GeForce RTX 4090 'Ada Lovelace' Graphics Card With GA102-300 GPU 'Rumored' Specs
We know from the leaked NVIDIA Ada Lovelace GPU configurations which show that the flagship GA102 Gaming chip will rock a total of 144 SMs, a 71% increase over the existing GA102 GPU, and house a massive 18,432 CUDA core count. The chip used by the flagship GeForce graphics card will rock the AD102-300 GPU and we can't say for sure if this will be the full-fat SKU since the RTX 3090 Ti with the GA102-350 rocks the full configuration while the GA102-300 SKU featured on the NVIDIA GeForce RTX 3090 is a cut-down SKU.
According to Kopite7kimi, the flagship GeForce graphics card will be based on the PG137/139-SKU30 PCB. These are both reference and Founders Edition designs. The reference design is provided to AIBs as a reference for their custom models while the FE design is exclusive to the reference Founders Edition model.

The graphics card is said to retain the 24 GB memory capacity while offering a memory speed of 21 Gbps across a 384-bit bus interface. That's the same memory design as the flagship Ampere GeForce, the GeForce RTX 3090 Ti, & should rock the same amount of bandwidth at 1004 Gb/s. As for the power input, the card would feature a single PCIe Gen 5 connector with a TGP rating of up to 600W. You will require a 4x 8-pin to 1x 16-pin adapter if you are running an older PSU or a single Gen 5 to Gen 5 connector if you have a compliant power supply.
https://wccftech.com/nvidia-ada-lovelace-geforce-rtx-graphics-card-flagship-gpu-ad102-24-gb-21-gbps-memory-600w-tgp/