Jump to content
Facebook Twitter Youtube

[Hardware] Kingston Fury Beast DDR5-5200 C40 Review: Not As Fierce As Expected


D.CraZy
 Share

Recommended Posts

New memory from the post-HyperX era

ZbXsp8YWEmutXve2qnNWHc-1024-80.jpg.webp

We check over 250 million products every day for the best prices

Kingston underwent a bit of restructuring last year. In a surprise move, the company sold off part of its HyperX gaming division to HP for $425 million. However, the transaction solely included HyperX's gaming peripherals, with Kingston retaining the memory, flash, and SSD products. The company would subsequently move the aforementioned products under the leading Kingston branding. With DDR5's introduction, Kingston has brought its Fury Beast series of memory kits up to speed. 

The Fury Beast family, which caters to gamers and enthusiasts, offers data rate options spanning between DDR5-4800 and DDR5-6000 and kit densities of 16GB and 32GB.

Kingston Fury Beast DDR5-5200 C40 (32GB Black) at Amazon for $271

The new Fury Beast DDR5 memory modules have a black PCB with a matching aluminum heat spreader. It's not a clone of the DDR4 versions, but it's close enough. The essence is still there, but Kingston revamped the heat spreader styling slightly. Overall, the design still looks aggressive and appealing. 

Surprisingly, Kingston decided to unleash the Fury Beast without RGB eye candy. It's a decision that some may like, while others may hate. The DDR4 counterparts are available in both RGB and RGB-less versions; therefore, it's plausible that the company could offer an RGB version of the DDR5 memory modules down the line. On the bright side, the Fury Beast's compact design means that compatibility with large CPU air coolers shouldn't be a problem. In addition, the memory's low-profile heat spreader doesn't add much height to the PCB. The Fury Beast measures 34.9mm (1.37 inches) in height.

Each memory module is 16GB with a single-rank design. Kingston has decided to go with Micron's MT60B2G8HB-48B (D8BNJ) integrated circuits for this particular memory kit. Meanwhile, ANPEC manufactures the power management IC (PMIC) on these Fury Beast memory modules. More specifically, they use the APW8502C-AX704 modules.

The Fury Beast runs at DDR5-4800 with timings configured to 40-39-39-76 by default. Kingston infused the memory with two XMP 3.0 profiles. The primary profile is for DDR5-5200, 40-40-40-80 timings, and 1.25V, whereas the second profile corresponds to DDR5-4800 at 38-38-38-70 and 1.1V. For more on timings and frequency considerations, see our PC Memory 101 feature, as well as our How to Shop for RAM story.

Uf5QVGipYryhVqaHS6pVCg-970-80.jpg

Our DDR5 test system leverages Intel's Core i9-12900K processor with Corsair's CUE H100i Elite LCD liquid cooler taking care of the cooling. The flagship Alder Lake chip resides on the MSI MAG Z690 Tomahawk WiFi motherboard, running the 7D32vH0 firmware. Meanwhile, the MSI GeForce RTX 2080 Ti Gaming Trio is responsible for our gaming RAM benchmarks.

Our Windows 11 installation, benchmarking software, and games are stored on Crucial's MX500 SSDs, whereas the RM650x feeds our entire system with the necessary juice. Lastly, the Streacom BC1 open bench table houses all of our hardware.

The Fury Beast performed within expectations. The memory kit was faster than the stock Crucial DDR5-4800 C40. However, Kingston's memory didn't shine in any category, although it did outperform the faster Corsair Dominator Platinum RGB DDR5-5200 C38 in a few workloads.

Bottom Line

The Kingston Fury Beast DDR5-5200 C40 won't wow you with its performance. However, it's a worthy alternative if you want to spend your money on a memory kit that's a bit faster than DDR5-4800. It even leaves a little headroom for manual overclocking. In addition, the memory has a low-profile design and looks sleek enough to fit inside gaming and enthusiast systems. However, some consumers may find it lacking in the bling department. 

DDR5 pricing has improved, but we're still far from seeing DDR4-like prices. For example, the Kingston Fury Beast DDR5-5200 C40 sells for $299, sometimes as low as $273.99 when the memory goes on sale. We wouldn't say the memory kit is cheap. However, it's from Kingston, and many consumers still view the brand as a synonym of quality and reliability.

https://www.tomshardware.com/reviews/kingston-fury-beast-ddr5-5200-c40-review

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

WHO WE ARE?

CsBlackDevil Community [www.csblackdevil.com], a virtual world from May 1, 2012, which continues to grow in the gaming world. CSBD has over 70k members in continuous expansion, coming from different parts of the world.

 

 

Important Links