[Hardware] WD Red SN700 SSD Review: An Improved SN750 by Another Name

[Agent47]

 

 

The WD Red SN700 promises up to 3400 MBps of bandwidth and peaks at 550,000 IOPS over a PCIe 3.0 interface. This isn't particularly exceptional in any way compared to general-use SSDs, but reflects its intended role as a drive for network-attached storage devices, or NAS. In addition, the drive is backed by a solid warranty, including up to 5100 TBW over five years (or 0.7 drive writes per day) and has an affordable 4TB option. 

An SSD designed for NAS has different requirements than typical consumer drives because they are commonly used for caching. NAS data caching can encompass read or write data, or both, depending on the implementation. Naturally, some redundancy and preferably power loss protection are ideal if the drive is used for critical write data. WD also targets the Red SN700 at small- and medium-sized businesses, or SMBs, expanding its usage to application hosting, virtualization, and databases.

WD has a whole lineup of drives under the SN branding, borne from client and OEM drives, focusing on consistency and comprehensible market segmentation. We’ve reviewed their Blue and Black NVMe drives for entry-level and higher-end consumer markets, respectively, while Red is used for NAS drives. We’ve seen this also with their SATA SSD offerings - including Green for OEM and low-cost solutions, so this branding reflects WD's segmentation in the HDD market as well.
The WD Red SN700 is very similar to the older WD Black SN750 and its lineage of drives, utilizing a proprietary and powerful controller known for its consistency and efficiency. WD updated the flash to 96-Layer as found on the SN850 which, while not as new or robust as the 112-Layer BiCS5 on the Black SN770, is quite competitive. In addition, the Black SN750 was known for its consistent post-cache performance, a desirable attribute for many NAS workloads. That makes the Red SN700’s design a logical choice for use in a NAS.
The Red SN700 is rated for sequential speeds of up to 3.4/3.1 GBps read/write and up to 550,000/520,000 random read/write IOPS. The drive is available in 256GB, 512GB, 1TB, 2TB and 4TB capacities ranging from $0.12-$0.26 per gigabyte. Being a NAS drive, it’s oriented at larger capacities where the price per gigabyte is quite competitive, especially at 4TB — a capacity that can be difficult to find with affordable pricing and TLC flash. This makes it even more of a compelling choice for consumer use if someone needs this combination of price, performance and endurance.

The five-year warranty comes with 1PBW per TB of capacity up to and including the 1TB SKU, with 2.5PBW and 5.1PBW total for the 2TB and 4TB SKUs, respectively. This is more endurance than WD's consumer variants, but otherwise, the drive has normal operating conditions and features (for example, a 70C maximum operating temperature). Unfortunately, the SN700 lacks power loss protection which, while not surprising, reduces its effectiveness in scenarios requiring absolute reliability.

Software and Accessories
The Red SN700 supports the Western Digital Dashboard utility that allows for analysis and updates through a user-friendly GUI. The software gives you a full look at the drive’s status, lets you test performance, and has other tools and settings. For example, you can do firmware updates, run S.M.A.R.T. tests, TRIM optimization, and secure erase the drive. While these are standard features, many third-party drive manufacturers lack such support.
The Red SN700 comes in the M.2 2280 form factor and is necessarily double-sided at the 4TB capacity with four flash packages. The front side has a longer label with drive details, such as the date of manufacture and the serial number. The labeled side has two of the four flash packages but not a second DRAM module. We can also see what appears to be a power management integrated circuit (PMIC).

PMICs and other integrated circuits are currently in short supply and are used on other items like DDR5 modules to regulate voltage.
The controller appears to be a newer revision of the model used for the Black SN750. This likely reflects the update to 96-Layer BiCS4 flash. In fact, the SN730, an OEM variant of the Black with 96-Layer flash for use in WD’s AN1500, has this controller. The single DRAM module on the drive, utilized for metadata, is 16Gb or 2GB in capacity. This is half the normal ratio but should be more than ample even for heavier workloads.

DRAM is predominately used for metadata and mapping on consumer drives with a maximum requirement of 1GB per 1TB of flash to reflect the nature of 32-bit addressing for 4KB logical pages. It’s possible to compress this addressing for consecutive pages, for example, and it’s unlikely the drive will face a workload that would exhaust what’s available here.