[Hardware] MSI MAG Z690 Tomahawk WIFI Review: Stealth Mode

[Agent47]

 

 

Although MSI’s MAG Z690 Tomahawk WIFI is priced fairly low (yes, $310 is low for a flagship-chipset board these days), the motherboard doesn’t disappoint on features. It comes with four M.2 sockets, integrated WI-Fi 6, the latest-generation audio codec, and a stealthy appearance that’s refreshing after years of RGB overload.

Compared to the previous generation Z590 Tomahawk, you get PCIe 5.0 support, an additional M.2 socket, updated power delivery, and a more premium appearance that skips integrated RGB lighting. The best part about the Tomahawk is the price. At $309.99, it’s on the ‘reasonable’ side of Z690 motherboards, and its price only increased about $30 over the last generation Tomahawk. Most (if not all) motherboard pricing has increased over the last couple of years, due to a combination of shortages and the more demanding needs of faster PCIe lanes. So to see such a meager increase from one generation to the next is refreshing.

Performance on the Z690 Tomahawk ended up average overall among the other boards we tested. While all tests were very close in either direction, the Procyon tests showed the most significant departure from average, matching the slower DDR4 boards more closely than their DDR5 counterparts. Gaming results were on par, if not marginally faster, than the rest so we’re in good shape there.
During testing, the only complaint I had with the MAG Z690 Tomahawk WIFI was that the board used too much voltage for stock operation, which caused minor thermal throttling during a stress test. Read on for more details covering the features, overclocking, and our takeaways from testing and use. First though, here’s a complete list of the MAG Z690 Tomhawk’s specs, direct from MSI.
Inside the box, along with the MSI MAG Z690 Tomahawk WIFI, is the accessory stack designed to get you started with the basics (think SATA cables, Wi-Fi antenna and a driver disk) without another a trip to the store. We have all of that, plus the driver disk is on a USB stick. Below is a complete list of the included extras.

USB drive (drivers)
Cleaning brush
Wi-Fi antenna
Case badge
User manual
Quick installation guide
MAG and Cable stickers
M.2 screws/standoff sets
EZ M.2 clip
Screwdrivers
EZ Front panel cable
(2) SATA cables
Looking at the Z690 Tomahawk WIFI itself on our test bench, we get a better view of the jet-black 6-layer PCB and heatsinks. The Tomahawk still keeps the military theme, with the heatsinks looking like panels on an army vehicle. You’ll find minimal branding, including the Tomahawk name in white on the chipset, while the MSI and MAG names hide on the VRM heatsink in black.

If you’re looking for integrated RGB lighting from the motherboard, look elsewhere as the Tomahawk WIFI does without. All lighting has to come from external RGB strips, but you do get four headers for that purpose on the board. In all, this board doesn’t jump out at you as a showpiece, but you don’t need to hide it in a windowless chassis either.
Focusing on the top half of the board, we’ll start on the left side and look at the large metal VRM heatsinks first. There is plenty of mass and surface area here to keep the VRMs below running within spec. The heatsinks aren’t connected to each other, but proved they could handle whatever we threw at them using the Intel Core i9-12900K processor. The two 8-pin EPS connectors (one required), located between the VRM heatsinks, deliver power to the CPU.

Shifting focus toward the right, we move past the socket area and run into the four double-side locking DRAM slots. These unreinforced slots support up to 128GB of DDR5 RAM (there is a DDR4 version of this board as well) with speeds listed up to DDR5 6400+ MHz. The more RAM sticks and higher capacity used, the lower peak value. For example, a two DIMM per channel configuration lists up to DDR5 4000. As always, your mileage may vary as to what you can achieve as what’s achievable depends on the memory kit in use and the processor’s memory controller.

Advertisement
Just above the DRAM slots are the first two (of eight) 4-pin fan headers. The CPU_FAN1 and PUMP_FAN1 located here default to PWM mode and output up to 2A/24W and 3A/36W. The remainder of the fans (SYS_FAN1-6) start in DC mode and provide up to 1A/12W. Overall, there are plenty of fan headers with plenty of power behind them to drive your chassis fans and water pump without worry.

To the right of the fan headers are the first two (of four) RGB headers. There are three 3-pin ARGB headers and one 4-pin RGB header. It’s nice to see plenty of RGB options, despite the lack of lighting on the board itself.

We spy a SYS_FAN header along the right edge, the EZDebug LED, 24-pin ATX connector, a USB 3.2 Gen1 header, and a front-panel USB 3.2 Gen 2 Type-C header. Everything is in its place here.