XYZPrinting DaVinci Mini: Getting Started in 3D Printing

[G.O.G]

When talking about 3D printing, most users think of complicated coordinates, hardware, software, technical adjustments ... and not being experts in the field, they end up being discouraged even before they started.

Luckily for us, there are always companies willing to make the difficult easy, ensuring that the experience leaves the user with good soap. That's exactly what has happened to us with the DaVinci Mini from XYZPrinting: along with powerful and capable hardware we will find an easy-to-use software, useful for both amateurs and experts.

And it is not just that the printing does not involve difficulty, but even the assembly is made simple. The instructions are clearly detailed in the attached manual, but if you still have doubts, the XYZprinting website offers several tutorials that will guide us step by step.

The process will not take more than 10 minutes, and will mainly consist of inserting the guide tube, place the roll in place and remove the stops and protectors that the printer carries for transportation.

Once we have it installed, XYZ recommends two programs to use: XYZware and XYZmaker. With the first, we can monitor the status of the printer from the computer, and perform tasks ranging from printing to the most basic maintenance of the printer.

On the other hand, with XYZmaker we will have a 3D editing program so simple that users without any experience have been able to use it without problem. In fact, they have come to describe it as "the equivalent of Paint, but in 3D printing."