[Hardware] ASRock Z690 Phantom Gaming-ITX/TB4 Review: Thunderbolt, but Limited Expandability

[Agent47]

 

 

The ASRock Z690 Phantom Gaming-ITX/TB4 is a compact Mini-ITX board that’s priced below most other Z690-based ITX offerings, at $349.99. But don’t let the price fool you. This little board packs almost the same punch as the higher-priced MSI MEG Z690I Unify we reviewed recently. The PG-ITX/TB4 comes with capable 10-phase power delivery, Thunderbolt 4, two M.2 sockets, three SATA ports and a last-generation flagship audio codec. Is the lower price worth having less of some items but full Thunderbolt 4 support? That’s up to you to decide, but we’ll help you get there.

If we take a moment to compare the previous-gen Z590 PG-ITX/TB4, we don’t see too many hardware changes outside of supporting the latest Alder Lake processors, along with PCIe 5.0 and DDR5 RAM. M.2 socket count remained the same (two), and SATA port count (three). Killer-based networking, integrated Thunderbolt 4 and even the last-gen flagship audio codec are all carryovers from the previous ITX Phantom. ASRock did improve upon the power delivery and tweaked the appearance, though the former was more of a necessity than an option.

Performance on the ASRock Z690 ITX/TB4 was all over the place. Some results were good and faster much of the competition, while others were slower. We saw above-average results in the Office tests within UL’s Procyon Office benchmark and in gaming, but Cinebench and memory bandwidth testing, among others, were on the slower side of the Z690 spectrum. Memory bandwidth in particular can certainly affect other results, especially in memory-sensitive applications.
While not much has changed on this generation’s Phantom Gaming ITX/TB4, not much has to. It’s a Mini-ITX size board, so there are inevitably some limitations. Whether or not you can live with them, is up to each person and use case. But since you’re paying a premium to use a small form factor, be sure it can support your needs, as expansion is limited. We’ll dig into the details shortly, but before we do, here are the full list of specifications from ASRock.
Inside the Box of the ASRock Z690 Phantom Gaming-ITX/TB4
Advertisement
While the accessory stack below the box’s cardboard partition doesn’t include much, it should have what you need to get started without a trip to the store.

Quick Installation Guide
Software Setup Guide
Wi-Fi Antenna
DVD driver disk
PG keycap
Case badge
(2) SATA Data Cables
(2) M.2 screws
Design of the ASRock Z690 Phantom Gaming-ITX/TB4
Since this is a Mini-ITX motherboard, we’ll start the board tour with the left side and work our way around clockwise. One of the first things I see is the large VRM heatsink that covers a portion of the 10-layer PCB and keeps the VRMs underneath cool, with the help of a tiny fan hiding below. The large black heatsink sports the Phantom gaming branding, with its black and red theme and the name of the board on top as the only color contrast. A heatpipe connects this part to the tall top VRM heatsink. Overall, the appearance won’t win any awards, but it certainly won’t detract from most build themes.

Hidden below towards the bottom of the board are the Realtek ALC1220 codec and a couple of Nichicon Gold audio capacitors. While this audio solution will undoubtedly be fine for most users, I would like to see the latest audio codec used since other Z690 Mini-ITX options, including the less–expensive model, all have newer audio options.

Along the top, we spy an 8-pin EPS connector to power the CPU. Above the top VRM heatsink, we run into a 3-pin ARGB header. Since the board doesn’t include any LEDs, this is the only way to add RGB bling to your system. You can control these attached elements through ASRock’s Polychrome Sync software.

Next, we run into three 4-pin fan headers. CPU_Fan1/2 supports up to 1A/12W output, while the CPU/Water Pump header supports up to 2A/24W. CPU_FAN2/WP can also auto-detect if a 3-pin or 4-pin fan is in use. Otherwise, you’ll have to configure the header in the BIOS manually.