[Tutorial] Important settings for Cs1.6 Steam after installation

[# Ret-H@CKer]

These settings are very important for many players, but these settings also depend on your pc.

As you know and probably have encountered this problem when installing CS1.6 on the Steam platform, it's possible that the cs is not full screen, black striping or lag at the side, up to 60 fps.

I'll make you a little tutorial:

1. Right click on the steam icon that is in the bar down the clock, then right click on the Collection (if you have the steam on the Romanian language) or the Library (if it is in English).

2. You will open the steam platform, right click on counter strike then advanced settings (in RO) or Properties (in EN):

 
3. Then Set the startup (RO) or Set launch option (EN) (1 in the next image), you will be opened a box where the settings (2 in the image) that I will post below and then OK 3 in the picture).
 

The settings are as follows: -nomsaa -nofbo -32bpp + ex_interp 0.01 + lightgamma 0.9 -noforcemspd -noforcemaccel -noforcemparms

 

What these commands do:

• -nofbo and -nomsaa -> These settings help to stop viewing players up or half of the screen.
• -32bpp -> forces the color depth to 32 bits
• if you have 64-bit pc set -64bpp instead of -32bpb
• + ex_interp 0.01 -> a very important setting
• + lightgamma 0.9 -> setting used for darker maps
•  -noforcemspd, -noforcemaccel and -noforcemparms -> use mouse settings.

 

4. After you get ok, go into counter-strike (in play) and enter the following settings in your console or cfg (if you have these settings will be read every time you enter the game without you once again in the console):

Quote

rate 25000
fps_max 101
net_graph 3 - shows how many fps you have. (only if you want to see how many fps you have, if you do not enter this line in cfg or console)
cl_updaterate 101
cl_cmdrate 105
ex_interp 0.01 - the person you shoot is more precise
cl_filterstuffcmd 1 - useful against destruction, extermination, etc
r_mmx 1 - if you have poor pc, if you have a good one, you can not put it.
gl_vsync 0 - this setting stops vsync, you do not have to disable it from the video card settings.

If you still have problems with these black-striped settings, check the video settings

If you are in the game, follow the next steps, if you do not come into play, and then follow the next steps: 

1. Options (EN) or Options if you have the menu from cs in Romanian
2.  Select the Video tab
3.  OpenGl and display mode set Normal
4. Set the resolution you want to play (image is my resolution so it should not be set exactly as in the picture): if you want to play the resolution 640x480 click the arrow next to the resolution, and select the resolution)
5. 5. Depending on your PC: If you have a better PC just check the box with Enable HD models, if you have a weaker PC, just check the last box with Low video quality
6. 6. Set as much as possible for better quality.
7. 7.Apply. 

I hope I helped you with this little tutorial.
Good luck and have fun
This tutorial is a registered trademark of the CSBLACKDEVIL.COM community.