Jump to content

Recommended Posts

Posted

Hexagon wall clock

Use the mechanism of the old wall clock to create a thing with a new look and a pinch of naughtiness. You can use cardboard and multicolored fabric for making, and you can use scraps of other things. The watch is made up of hexagonal pieces that you can combine as you wish, use the desired number and arrange them as you wish.

Натиснете снимката за да я уголемите  Име:часовник1.jpg Прегледи:1 Размер:56.8 КБ ID:5511660

 

 

Materials needed:

- cardboard
- pieces of tissue
- model knife
- scissors
- wall clock mechanism
- glue


Instructions:

1. Download and resize the hexagons, print them out, and cut them with scissors. Use the paper template to cut several hexagons of the desired size from the cardboard. The idea shown uses 19 pieces, but you can create a dial of fewer or more pieces of the desired size.

 

Натиснете снимката за да я уголемите  Име:часовник2.jpg Прегледи:1 Размер:12.4 КБ ID:5511661

 

2. Put one of the cardboard pieces on the back of a piece of cloth. Outline with a 6 mm tolerance. Cut the fabric along the outlined lines.

 

Натиснете снимката за да я уголемите  Име:часовник3.JPG Прегледи:1 Размер:59.8 КБ ID:5511662

 

Натиснете снимката за да я уголемите  Име:часовник5.jpg Прегледи:1 Размер:40.4 КБ ID:5511663

 

3. Glue the fabric to the bottom of the cardboard by applying a few small dots from the glue around the periphery. Press the fabric to tighten the glue. Fold the fabric along the corner pieces to cover the entire periphery.

Натиснете снимката за да я уголемите  Име:часовник6.jpg Прегледи:1 Размер:46.1 КБ ID:5511664

 

4. Lay the hexagonal parts side by side so that they touch the sides. Put some glue on the contact lines and press down to tighten the glue. Grasp all hexagonal parts as desired.

Натиснете снимката за да я уголемите  Име:часовник7.JPG Прегледи:1 Размер:64.3 КБ ID:5511666

 

5. With a dummy knife, cut a hole in the center of one of the shapes to insert the top of the mechanism so that it locks the arrows on the clock. Extend the opening gradually so that it does not appear too wide for the sharp part on which the arrows of the mechanism are mounted. 6. You can cut several rectangles out of cardboard to better secure the parts of the dial on the back. Attach them with a little glue around the periphery of the clock to cover the center. This is necessary if the mechanism is too heavy and you think the adhesive will not be able to support the weight.

 

Натиснете снимката за да я уголемите  Име:часовник8.JPG Прегледи:1 Размер:53.0 КБ ID:5511667

 

 

7. Mount the mechanism and put the arrows on the clock.

 

 

Натиснете снимката за да я уголемите  Име:часовник9.JPG Прегледи:1 Размер:22.1 КБ ID:5511668

 

 

8. Turn on the batteries, set the

 

Натиснете снимката за да я уголемите  Име:часовник10.jpg Прегледи:1 Размер:79.3 КБ ID:5511669

 

 

 

clock, and hang the clock on the wall.

 

 

 

 

 

 

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.