Akrapovic Posted October 6, 2019 Posted October 6, 2019 Hazan Motorworks is a preparation workshop run by Maxwell Hazan in California, the mecca of preparers. Now they present an excellent work with this beautiful KNTT 1200, a tribute to the Harley sports of the 60s, for which they have started completely from scratch. In this way, the tubular steel chassis is entirely made by hand, with an aluminum swingarm with reinforcement - with a Fox 'bicycles' shock absorber and a traditional Royal Enfield telescopic fork, which have been equipped with two unperforated discs, each equipped with two Wilwood pliers. KNTT 1200 from Hazan Motorworks 2 The twin-cylinder V-engine is a veteran Knucklehead of S&S Cycle and 1,208 c.c. to which a pair of Dell’Orto PHF36 carburetors and two leaks with free outlet have been installed, looking for a less decent power. Put to make a single engine, the gearbox of a veteran Indian Chief has been mounted, with change to the right, which forces to mount the rear brake pedal to the left and that this should be operated with the heel to avoid primary transmission (by chain). KNTT 1200 from Hazan Motorworks 3 All the beautiful bodywork is made by hand in aluminum and both tires are 18 ”, mounting high profile tires. 2
Recommended Posts